Quality and Safety on Every Job

Planned safely, done to specification and properly documented.

On a working industrial site, the finish is only part of the job. You also need to know the work was planned safely, done to specification and properly documented. That’s how we work, whatever the size of the project.

How we check quality

  • We confirm the requirements first. We check the contract, specification, timeframes and reporting requirements before work starts, and can provide quality, safety and environmental management plans.
  • We check conditions before coating. We use a coating inspection meter to record humidity, air and surface temperature and dew point.
  • We measure as we go. Wet film thickness is checked on each coat, and products are applied to the manufacturer’s specifications.
  • We photograph the work. Each stage is photographed and kept with the job records.
  • You get the paperwork. On completion, we provide application records and quality assurance documentation.
  • We fix problems properly. Any non-conformance is raised with you promptly, with the cause identified and corrective action taken.
Coating inspection meter showing humidity, temperature and dew point readings
Rob checking wet film thickness with a wet film comb on a blue floor coating

The records you get

Quality shouldn’t just be a promise, so we write it down. Every job comes with a paper trail:

  1. Proposal. Before we start, we set out how we’ll do the job, the products we’ll use and their technical data sheets, and how we’ll keep the site safe.
  2. Inspection and Test Record. Filled in on site as the work happens. Each section is finished and initialled before the next one starts.
  3. Job Completion Report. Every job gets one. It summarises the work, the inspection records and the photos for your files. The full signed inspection record is available on request.

What an inspection record captures

What we checkWhat we record
Technical data sheets and SDS on site and readChecked and initialled
Work area marked out and checked for embedded services before cuttingChecked and initialled
Exclusion zone, barricades and signage upTime recorded
Dust extraction, H-class vacuum and PPE checkedChecked and initialled
Inspection gauges on siteListed, with calibration dates
Products receivedBatch number, best before and quantity
Site conditions at application73.2% humidity, 25.2 °C air, 24.9 °C surface, 20.0 °C dew point (4.8 °C above dew point)
Each stage of the workDate, time and detail, finished and initialled before the next stage starts
Sample only, based on one of our joint repair records. Each record is tailored to the job and products.

How we keep people safe

  • Planned work: we identify hazards and controls for each job, with Safe Work Method Statements for high risk work.
  • Your site rules: we work to your inductions, permits and PPE requirements.
  • Separated work areas: exclusion zones and barricades keep other people away from the work.
  • Dust control: concrete cutting and grinding use on-tool extraction and H-class vacuums, and workers wear fit-tested respirators to manage silica exposure.
  • Work at height: our operators hold boom-type elevated work platform high risk work licences for platforms over 11 metres, and use harnesses where required.
  • Consultation and training: workers are trained and consulted, and hazards and incidents are reported and acted on.

Safety is our background

Safety isn’t an add-on for us. Our director, Wendy Bishop, also runs Projects One Safety Online, a safety management system and Safe Work Method Statement service for the construction industry. That same focus on practical, site-ready safety comes to every Industrial CQ job.

Projects One Safety Online logo
Wendy Bishop, Director of Industrial CQ

Licensed and insured

Industrial CQ brings 15+ years’ experience in industrial and mining environments. We hold QBCC licence 15387335, with $20 million public liability cover and WorkCover. Our policies follow the Work Health and Safety Act 2011 (Qld). Full details are in our Capability Statement.

Talk to us about your site: call 0479 199 287 or email admin@industrialcq.com.au.